Skip to content

Free installation, and a free quote by phone

(512) 883-1130
(512) 883-1130

ServicesWater Testing

Water Testing & Analysis in Briarcliff

Before anyone suggests a filter, it helps to know what is really coming out of your tap. We test your water at the kitchen sink for free, explain each reading in everyday language, and give you a straight answer on whether your home needs any treatment.

Technician at a kitchen sink places a vial into a rack of pink, yellow and blue water test samples beside an open test kit with dropper bottles on a granite counter

Test first, then decide

Most people call us because something seems off. A chlorine smell in the shower, white crust on faucets, spots on glasses, or a taste that sends everyone to bottled water. Those clues point in different directions, and guessing is how families end up with equipment they never needed.

Water testing gives you facts to work from. We check the readings that drive treatment decisions, such as hardness, chlorine, iron, pH and total dissolved solids, and we write the results down so you keep them. Central Texas water often runs hard from the limestone it passes through, but your home's numbers are the ones that matter.

If the results say your water is fine, we will tell you so. We treat every visit the way we would want a neighbor treated, and that means no pressure and no scare talk.

What we check during your test

Hardness reading

Calcium and magnesium are measured in grains per gallon. That reading tells us whether your home calls for water softener installation, a salt-free water conditioner or no treatment for hardness.

Chlorine and taste check

We measure the disinfectant level at your faucet. When chlorine is causing the taste or odor, carbon whole-home filtration usually solves it.

Iron, pH and dissolved solids

Iron causes rust-colored stains, low pH can eat at copper pipes, and TDS shows the total amount dissolved in the water. Read together, they show whether a reverse osmosis system for drinking water deserves a look.

Lead and lab follow-up

Lead tends to come from old solder and fixtures rather than the supply. Home kits can't detect it at the levels that count, so if you want to know, we explain how to send a sample to an independent lab.

Written results you keep

Each reading is written down for you with a brief explanation. The results are yours to show anyone, another company included.

Signs it's time to test your water

  • A chlorine smell or odd taste

    If the water smells like a pool or tastes flat or metallic, a quick test shows what is causing it and what would fix it.

  • White scale on fixtures and glass

    Crusty showerheads, cloudy glasses and a noisy water heater are classic hardness clues. Testing tells you how hard the water really is.

  • Orange or brown stains

    Rust-colored rings in sinks, tubs or toilets often mean iron. We confirm it before anyone talks about iron and sulfur removal.

  • Dry skin and stiff laundry

    These can come from hard water, but not always. A test separates the water problem from the soap problem.

  • Older plumbing

    Homes with original copper lines and older soldered joints are worth checking, especially with small children in the house.

  • A sales pitch you're unsure about

    If another company has recommended an expensive system, an independent test lets you check the claim before you sign anything.

How a test visit goes

  1. 1

    Set up a time by phone

    Tell us what you have been noticing and we will pick a visit time that suits your day. The test itself costs you nothing.

  2. 2

    Samples at your tap

    We run cold water at the kitchen sink, plus a second tap if it helps, then test right there while you watch. Nothing in your home gets moved or disturbed.

  3. 3

    Walk through the numbers

    We sit down together, go over each reading and show how it compares to typical ranges. Ask as many questions as you like.

  4. 4

    A straight answer on next steps

    When a system would make a real difference, we point you to the one that suits your water and put a quote in writing. When nothing is needed, you hear that from us plainly, and your results stay with you.

What water testing costs

We don't charge for the in-home test, and having it done doesn't commit you to buying a thing. Money only enters the picture if you want an independent lab panel or choose to treat your water, and we go over either one with you before anything is ordered. If you do decide on a system, installation is free.

On-site readings versus a lab panel
The readings we take at your tap cost nothing. Independent lab panels are priced by the lab, based on what they measure.
How much you want checked
A lead-only test is a different job from a broad panel covering metals and other compounds. We help you choose only what answers your question.
Number of taps sampled
Testing one kitchen tap is simple. Checking several fixtures for plumbing-related lead adds samples to the panel.
What the results point to
If you choose treatment, the type of system and the size of your home set the equipment price. You see that in a written quote first.

Common questions about testing

Something not covered here? (512) 883-1130

Does the water test really cost nothing?

It does. We visit, test at your faucet and explain the results for free. Getting tested doesn't commit you to anything.

Why test if my utility says the water meets standards?

Utilities do solid testing at the plant and throughout their lines, but they can't check your pipes, fixtures or water heater. Taste, hardness and lead from plumbing depend on your house. Often the results are good news, and that's worth knowing too.

Are you going to push a sale?

We explain what the readings mean and what, if anything, would help. Many visits end with us telling you your water is fine. If you'd like a quote, you get it in writing and can decide whenever you're ready.

How long will the visit last?

The test is quick and done at your sink with you watching. The rest of the visit is mostly answering your questions, so it runs as long as you'd like to talk.

Do you test in towns besides Briarcliff?

We do, including Lakeway, Bee Cave, Lago Vista and other towns close by. Mention your town when you call and we'll confirm.

When should I test again?

Test again any time something changes, like a new odor, new stains or recent plumbing work, and after a system goes in to make sure it's working. Beyond that, checking every year or two keeps you up to date.

Under-sink reverse osmosis system with three filter housings, membrane and storage tank beneath a stainless sink, chrome drinking faucet on the granite counter above

Find out what's in your water

One phone call sets up a free test at your kitchen tap. You will get real numbers and a straight answer, whether or not you need anything.